background image

8

WEIGHT BENCH

 WB50

1.3 

Set-Up Place 

 

WARNING 

 

+

Do not place the equipment in main corridors or escape routes.

 

CAUTION 

 

+

Choose a location in which to place the equipment such that there is enough free space/

clearance to the front, the rear and to the sides of the equipment.

 

+

The training room should be well ventilated during training and not be exposed to any 

draughts.

 

+

 Choose the place in which to set up the equipment such that there is enough free space/

clearance to the front, the rear and to the sides of the equipment.

 

+

 The set-up and mounting surface of the equipment should be flat, loadable and solid.

 

ATTENTION

 

+

The device may only be used in one building, in sufficiently tempered and dry rooms 

(ambient temperatures between 10°C and 35°C). The equipment should not be used 

outdoors or in rooms with high humidity (over 70%) like swimming pools.

 

+

A floor protective mat/equipment underlay can help to protect high-quality floor coverings 

(parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight 

unevenness.

Содержание DU-WB50

































Отзывы: