Duke Fitness DU-WB50 Скачать руководство пользователя страница 4

Страница: 4 / 32

WEIGHT BENCH

WB50

ABOUT THIS MANUAL

Please carefully read the entire manual before installation and first use. The manual will help you to

quickly set up the system and explains how to safely use it. Make sure that all persons exercising with

the equipment (especially children and persons with physical, sensory, mental or motor disabilities)

are informed about this manual and its contents in advance. In case of doubt, responsible persons

must supervise the use of the equipment.

This equipment has been manufactured according to the latest safety knowledge.

As far as possible, potential safety hazards which could cause injury have been

eliminated. Make sure to carefully follow the instructions and that all parts are

securely in place. If required, read through the instructions again to correct any

mistakes.

Please pay close attention to the safety and maintenance instructions given here. The contract

partner cannot be held liable for damage to health, accidents or damage to the equipment when it

is not used in accordance with these instructions.

The following safety instructions may appear in this manual:

࣑

ATTENTION

This notice indicates potentially hazardous situations which, if not avoided, may result in

property damage.

⚠

CAUTION

This notice indicates potentially hazardous situations which, if not avoided, may result in slight

or minor injuries!

⚠

WARNING

This notice indicates potentially hazardous situations which, if not avoided, may result in death

or serious injuries!

⚠

DANGER

This notice indicates potentially hazardous situations which, if not avoided, will result in death

or serious injuries!

NOTICE

This notice indicates further useful information.

Retain these instructions in a safe place for future reference, maintenance or when ordering

replacement parts.

Содержание DU-WB50

































Результаты поиска

Содержание DU-WB50

Отзывы:

Похожие инструкции для DU-WB50

Бренды по названию

Популярные бренды

Duke Fitness DU-WB50, Руководство по сборке и эксплуатации

Результаты поиска

Содержание DU-WB50

Отзывы:

Похожие инструкции для DU-WB50

Бренды по названию

Популярные бренды