Ducati SCRAMBLER 2020, Руководство пользователя

Страница: 182 / 239

Connect the battery charger leads to the battery
terminals: the red one to the positive terminal (+),
the black one to the negative terminal (-).
Important
Make sure the charger is OFF when you
connect the battery to it, or you might get sparks at
the battery terminals that could ignite the gases
inside the cells. Always connect the red positive (+)
terminal first.
Grease screws (1, Fig 190).
Refit the battery, connect the positive cable
(2, Fig 190) and ABS positive cable (3, Fig 190) to the
positive terminal, the negative cable (4, Fig 190) and
the ABS negative cable (5, Fig 190) to the negative
terminal of the battery, always starting from the
positive one (+), and start the screws (1, Fig 190).
Attention
Keep the battery out of the reach of children.
Charge the battery at 0.9 A for 5÷10 hours.
If the motorcycle must be jump-started in an
emergency with an external starting device, it is
possible to connect the starting device to the
battery without removing it from the vehicle.
Connect the external starting device positive pole to
the battery positive pole and the external starting
device negative pole to the battery negative pole.
Refit the battery cover (A, Fig 189), engage rubber
band (C, Fig 189) and tighten screw (D, Fig 189) to 5
Nm ± 10%.
Attention
When connecting the external starting device
to the poles of the vehicle battery, pay utmost
attention not to touch any other metal parts on the
vehicle.
181