
Tyres
Front tyre pressure:
2.2 bar - 32 PSI (rider only) - 2.2 bar - 32 PSI (full load).
Rear tyre pressure:
2.2 bar - 32 PSI (rider only) - 2.6 bar - 38 PSI (full load).
As tyre pressure is affected by ambient temperature
and altitude variations, you are advised to check and
adjust it whenever you are riding in areas where
ample variations in temperature or altitude occur.
Important
Check and set tyre pressure when tyres are
cold. To avoid front wheel rim distortion, when riding
on bumpy roads, increase tyre pressure by 0.2 ÷ 0.3
bar (2.9÷4.35 PSI).
Tyre repair or change
If you find low pressure on one tyre, check the tyre
for punctures.
If the tyre tube is punctured or damaged, it must be
replaced as soon as possible. A repaired tyre tube
could not provide the same reliability level of a new
one and can break while riding.
Attention
In case of punctured tyres, replace both the
tyre and the inner tube. Replace tyres and inner tube
with OE ones only. Be sure to tighten the valve caps
securely to avoid leaks when riding. Never use tyres
without tube. Failure to heed this warning may lead
to sudden tyre deflation and to serious danger to
rider and passenger.
Important
Use only OE tyres and inner tubes.
Attention
Every time you replace a tyre it is necessary to
replace the inner tube as well: a used tube could be
stretched and, if installed in a new tyre, could get
irremediably damaged with severe consequences for
rider and passenger.
After replacing a tyre, the wheel must be balanced.
Attention
Do not remove or shift the wheel balancing
weights.
205
Содержание SCRAMBLER 2020
