![background image](http://html1.mh-extra.com/html/ducati/scrambler-2020/scrambler-2020_owners-manual_2537734158.webp)
Front fork adjustment
The front fork used on this motorcycle has rebound
(return), compression and spring preload
adjustment.
It is possible to adjust the spring preload on both
legs whereas compression and rebound can only be
adjusted on the LH and RH legs, respectively.
Adjustment is done by external screw adjusters:
1) for rebound damping (Fig 167);
2) for inner spring preload (Fig 167) and (Fig 168);
3) for compression damping (Fig 168).
Position the motorcycle on its side stand so that it is
stable. Turn adjuster (1) at the top end of the RH fork
leg with a suitable screwdriver to adjust rebound.
Turn adjuster (3) at the top end of the LH fork leg
with a suitable screwdriver to adjust compression. By
turning adjuster screws (1) and (3) you will hear some
clicks; each click corresponds to a damping setting.
The stiffest damping setting is obtained with the
adjuster turned fully clockwise to the "0" position.
By turning counter clockwise starting from this
position, count the clicks that will correspond to
positions "1", "2" etc.
STANDARD settings are as follows:
1
2
Fig 167
2
3
Fig 168
157
Содержание SCRAMBLER 2020
