![Dualit CafePro Скачать руководство пользователя страница 15](http://html.mh-extra.com/html/dualit/cafepro/cafepro_original-instruction_2536977015.webp)
28
29
PASSWORD SETTING
Original Password: ___ ___ ___
New Password: ___ ___ ___
5
SECS
SETTINGS MENU
4. System Check
5. Change Menu Password
6. Version Info
PRESS
OK
TO START
5
SECS
Note:
The first time the Thermal
Protection Device activates,
the customer can Reset.
If the Thermal Protection
Device requires resetting
a second time do not use,
unplug immediately and
please contact Dualit on
01293 652500. The Machine
is faulty.
SETTINGS MENU
4. System Check
5. Set Menu Password
6. Version Info
PRESS
OK
TO START
5
SECS
PASSWORD SETTING
New password: ___ ___ ___
5
SECS
5
SECS
MENU PASSWORD
This allows the user to password protect the Settings Menu, preventing
access to unauthorised personnel. If you forget your password, see
Troubleshooting for master override password.
SET PASSWORD
3
CHANGE MENU
PASSWORD
The display will allow you to
set a 3 digit password. Use
the up arrow to change the
digit and down to move to the
next digit. Press ‘OK’ to set.
1
2
CHANGE MENU
PASSWORD
RESET MENU PASSWORD
Press the down arrow until
‘Set Menu Password’ is
highlighted, then click ‘OK’.
Hold the ‘OK’ and ‘BACK’
buttons for 5 seconds to
access the menu.
2
1
SET MENU
PASSWORD
MENU
A screen will be displayed
allowing you to change the
menu password. Use the up
arrow to change the digit and
down to move to set the next
digit. Press ‘OK’ to set.
Press the down arrow until
‘Change Menu Password’ is
highlighted, then click ‘OK’.
Note:
‘OK’ - Select
‘BACK’ - Return
/\ - Change Digit
V - Move to Next Digit
SETTINGS MENU
7. Default Settings
8. Standby Settings
PRESS
OK
TO START
5
SECS
5
SECS
5
SECS
MENU
DEFAULT SETTINGS
Carrying out the following steps will reset the machine to original factory
settings. For other issues, please refer to Troubleshooting on page
35.
2
1
RESET
SWITCH OFF
Remove pin and replace
back in storage area under
the Water Tank lid. Switch
the machine back
on.
The machine’s Thermal
Protection Device is now
reset.
Switch the machine off and
unplug. Find the Reset Pin
(next to the Water Tank).
Put the Reset Pin into the
reset hole (underneath the
machine in the middle at the
back) and apply pressure.
2
1
DEFAULT
3
RESET
Press the down arrow
until ‘Default Settings’ is
highlighted, then click ‘OK’.
Hold the ‘OK’ and ‘BACK’
buttons for 5 seconds to
access the menu.
Follow the on display
instructions. Click ‘OK’ to reset
volumes or click ‘BACK’ to
cancel and return to the menu.
THERMAL PROTECTION DEVICE
U
N
PL
U
G W
HEN NO
T
IN
U
SE
SW
ITCH OFF &
U
N
PL
U
G W
HEN NO
T
IN
U
SE
SW
ITCH OFF &