20
21
1
2
Caution: The Hot
Water Nozzle may be
hot
. Ensure the water tank
is filled with water.
DISPENSING HOT WATER
CAUTION: WATER WILL BE HOT. Risk of scalding. Only
use the Hot Water Wand Handle to position wand.
Slowly turn the Hot Water
Valve anti-clockwise to dispense
Hot Water. The speed of
dispense can be controlled by
adjusting the valve.
ADJUST FLOW
PREPARE
To stop the flow, turn Hot
Water Valve clockwise
towards the ‘Off’ position.
1
If the machine is left idle
for 30 minutes, it will enter
Standby Mode. In Standby
Mode the screen saver will
be displayed. Standby Mode
can be adjusted if required
(see page 30).
2
Press ‘OK’ button to
exit standby.
The Dosing
Buttons will flash white whilst
reheating, then turn solid
once the temperature is
correct for extraction.
STANDBY MODE
REHEAT
STANDBY
2
Pull the Drip Trays out of the
machine. Be aware that there
may be a large amount of
liquid in the Drip Trays.
3
EMPTY INTO SINK
Tilt the Drip Tray against the
edge of the sink to remove
any liquid that may have
collected, whilst retaining
the used capsules.
Clean the Large Cup Holder
and Drip Trays with a damp,
non abrasive cloth.
Wipe down the Steam
Wand and Hot Water
Wand with a damp, non
abrasive cloth.
CLEANING - DAILY
BEFORE CLEANING, MAKE SURE THERE ARE
NO CAPSULES
IN
THE MACHINE.
Dispose of the used capsules
left in the Drip Tray. If using
Dualit compostable capsules,
dispose of via your council
food waste collection.
DISASSEMBLE
5
STEAM WAND
LARGE CUP
HOLDER
4
Ensure the Levers are pushed
down and no capsules are
present. Press the Dosing
Buttons on Group 1 and 2.
Water will flush through the
machine into the Drip Trays.
Switch off, unplug and
allow to cool.
1
FLUSH
U
N
PL
U
G W
HEN NO
T
IN
U
SE
SW
ITCH OFF &
U
N
PL
U
G W
HEN NO
T
IN
U
SE
SW
ITCH OFF &
3
EMPTY INTO BIN
3
STOP DISPENSING
