Du Pont WFQT13000 Series, Руководство по установке

Страница: 4 / 28

Proper Installation
Please read all instructions, specifications, and precautions before installing and using your water filter system.
Precautions:
For cold water use only.
After prolonged periods of non-use (such as during a vacation), it is recommended that the Filter System be flushed thoroughly. Let water
run for 10 minutes before using.
The QuickTwist™ Filter used with this Filter System has a limited service life. Changes in taste, odor, and/or flow of the water being
filtered indicate that the filter should be replaced.
Before You Begin
n Check under the sink to locate a solid wall surface to mount the Filter System.
NOTE: The Filter System must be mounted in a vertical position.
n
Locate the cold water pipe under your sink and observe if it is a flexible hose or a rigid pipe (ex: plastic, metal, copper). Rigid pipes
may require cutting in order to make adequate space to install the Kitchen Faucet Adapter (see Step 2). Also determine if you have
all appropriate fasteners and adapters to fit your plumbing.
n
Consult your local plumbing codes and install accordingly.
n
If you plan to install your QuickTwist
TM
WFDW13000 Series direct to your kitchen faucet please skip to page 10.
n
If you purchased a QuickTwist
TM
WFDW13500 Series and you plan to direct connect to your kitchen faucet please skip to page 10.
STEP
1
Turn Off the Main Water Supply Line
1
Locate the cold water shut-off valve under the sink. Turn off the cold water supply to the existing kitchen sink.
NOTE: If uncertain about which line supplies the cold water, turn on the hot water to the faucet. Allow the water to heat up and carefully
feel the pipes under the sink. The pipe that remains cool to the touch is the cold water supply.
2
Turn on the cold water faucet on the kitchen sink to release pressure and allow water to completely drain from the line.
This filter must be protected
from freezing, which can
cause cracking of the filter
and water leakage.
CAUTION
Because of the product’s limited service life and to prevent costly repairs or possible water damage, we strongly
recommend that the head of the filter be replaced every ten years. If the head of the filter has been in use for
longer than this period, it should be replaced immediately. Date the top of any new head to indicate the next
recommended replacement date.
CAUTION
RIGID PIPE INSTALLATION
FLEXIBLE HOSE INSTALLATION
KITCHEN FAUCET
FAUCET FOR
FILTERED WATER
HOT WATER
VALVE
COLD WATER
VALVE
KITCHEN FAUCET
FAUCET FOR
FILTERED WATER
HOT WATER
VALVE
COLD WATER
VALVE
1
COLD WATER
VALVE
4
WFQT13000 & WFQT13500 Series