27
1.11 Default settings
The option
PF
sets back the default settings of the receiver.
The default settings are:
- no remotes registered in the memory,
- all 4 channels working in the monostable mode (0.5 sec turn on time),
- simple registering blockade: off,
- PIN checking: off,
- double-click mode: off.
To reset receiver and set the default settings:
a) use up-down buttons to choose option
PF
and press button,
b) press button three times while the display shows A3 to confirm the option,
Remarks !
Using of
PF
causes removal of all registered remotes from
4
the receiver’s memory and sets default settings to all channels.
press button to cancel.
4
option
A
A
B
Fig. 21
Default settings procedure
1
2
3
4
A
A
A
A
Back
to option PF
REMOTE