15
Remarks !
1.2.2 Defining channels to the remote’s buttons
After declaring the remote to be edited, all edit sub options are available. Use up/down
buttons in the remote to change the sub options:
CP -
copying the remote’s preferences - see page 14,
P1...P4 -
define channels to the remote’s buttons ,
bc -
simple registering blockade (individually for every remote) - see page16,
UP -
deleting the remote - see
page 1
7
.
New registered remote gets the default preferences:
Button 1 - channel 1,
Button 2 - channel 2,
Button 3 - channel 3,
Button 4 - channel 4.
This option allows to change these settings. It is possible to attach few buttons to the same
remote button, etc.
Changing the definition for the channels to the remote
buttons:
a) choose the proper option
P1
...
P4
for the button which is
to be edited,
b) press button to go to the chosen option,
c) using left/right buttons choose the channel to be
attached / deleted.
d) press to set up the sign _ (to delete) or C (to define the
channel to the edit button) press up-down buttons.
e) press button to confirm.
A
A
It is possible to change the button’s
4
configuration without the physical
presence of the remote.(page 18).
Fig.10
Define
channels to the
remote’s buttons
A
A
A
A
A
Back to option
P1...P4
1
2
3
4
REMOTE
