1.2.4 Deleting the remote
After declaring the remote to be edited, all edit sub options are available. Use
up/down buttons in the remote to change the sub options:
CP -
copying the remote’s preferences - see page 14,
P1...P4 -
define channels to the remote’s buttons
-
see page 16,
bc -
simple registering blockade (individually for every remote) - see page 16,
UP -
deleting the remote
This option is used to delete one of the existing remotes. All the other numbers of
the existing remotes will be kept. When another remote will be added to the system - the
number it gets, will be the first available.
To delete a remote:
a) press button while the displays shows
UP
,
b) press button while displays shows
A3
three times.
1
2
3
4
REMOTE
A
A
A
A
Back to
option PP
Remarks !
To keep the position number of a temporarily unavailable remote in the receiver’s
4
memory you must disconnect all channels from the buttons (options
P1
...
P4
),
4
It is possible to go back (cancel) in the menu by pressing button ,
It is possible to delete a remote without the physical presence of the remote - see
4
page 18.
A
A
17
Fig.12
Deleting the
remote
B