DTM System cloud FLEX, Инструкция по установке и обслуживанию, Страница: 36 / 40

36
5.11. PF option – deleting of memory and factory reset.
This option is used to restore factory settings and deleting
all assigned remotes. Factory settings after acceptance of PF
function
 no remotes assigned to the receiver

all the channels operate in monostable mode of
connection time 0,5 sec;

copying blockade switched off;
 access blockade switched off ( no PIN code);

double click function switched off;
 manual control output NO type assigned to C1 channel in
breach time 0s.
To restore factory settings it is necessary to (Fig.29):
 with NEXT button choose PF option;

press OK/ESC button of the receiver;
 when display shows 'PF.A3' press OK/ESC button three
times – wave animation is shown on the display – after it
is finished the receiver is formatted.
To quit formatting in any moment, but before its beginning press
and hold OK/ESC button of the receiver.
The process of formatting causes irreversible removing
all entered data by the user so as: memory of remotes,
configuration of the receiver.
There is a possibility of creating and restoring the copy of data,
from the level of the CloudFlex web application (pt 8).
Fig. 33 Restoring- formatting the memory of the
receiver, PF function in main menu of the receiver.