34
5.9. HA option - disabling schedules
Schedules are a functionality of the
FLEX receiver, thanks to which the receiver can
automatically switch on, switch off and block
selected channels at programmed times. To use
the schedules, it is necessary to have a FLEX
receiver equipped with a WL2 card, which allows
you to control and manage the receiver via Wi-Fi
and a dedicated CloudFlex application.
The 'HA' option enables immediate disabling of
all schedules without the need to access the
cloud, e.g. in the event of an emergency to
control a channel that is blocked by a schedule.
The 'HA' option disables all the schedules
programmed in the receiver.
To disable all schedules programmed in the
receiver from the menu level, proceed in the
following sequence:
from the main menu level with the
NEXT button select the 'HA' option and
press the OK / ESC button of the
receiver;
'oF' will be flashing on the display
press OK / ESC button on the receiver;
with the display 'oF.A3' shown, press
the OK / ESC button three times to
disable all schedules.
Reactivating individual schedules is only possible
from the cloud.
Fig. 31
Disabling all programmed schedules from the
receiver's menu.
RETURN
TO MENU
Содержание cloud FLEX
