DTM System cloud FLEX, Инструкция по установке и обслуживанию

Страница: 15 / 40

15
5.1.7. UP sub option – removing the remote from the receiver memory
To remove the remote from the receiver memory it is necessary to (Fig.14):

when in edition mode of the remote (PP) with NEXT button set UP option and press OK/ESC button of the
receiver;

when the display shows 'UP.A3' press three times OK/ESC button of the receiver to confirm.
Reference number of removed remote left is attached to other remote entered in the future. Numbering of the
rest of the remotes doesn’t change.
In the case when the remote is to be switched off temporarily it is possible to keep the reference number of this remote in
the receiver memory, switch off all the channels assigned to the buttons (P1...P4 options) instead of removing this remote
completely from the receiver memory.
Fig.14 Removing of declared remote, UP function in PP submenu of the receiver.