04/2022
-
Version 1 DoorTec Deutschland | www.doortec.online
3
Änderungen vorbehalten | Subject to Modifications
3. SAFETY
-
RELATED REGULATIONS
For connecting, programming and servicing, the fol-
lowing regulations must be observed (the list is not
exhaustive).
•
EN 12453 (Safety in use of power operated doors
-
Requirements)
•
EN 12445 (Safety in use of power operated doors
-
Test methods)
•
EN 12978 ((Industrial commercial and garage doors
and gates
-
safety devices for power operated doors
-
Requirements and test methods)
References to additional, additionally accepted stand-
ards must also be observed, such as:
•
EN 60204
-
1 (Safety of machinery, electrical equip-
ment of machines, part 1: general requirements)
•
EN 12100
-
1 (Safety of machinery, basic concepts,
general principles for design. Basic terminology,
methodology)
•
EN 60335
-
1 (Household and similar electrical appli-
ances
-
Safety)
•
EN 60335
-
2
-
103 (Particular requirements for drives
for gates, doors and windows)
•
Committee for Workplaces (ASTA)
•
Workplace regulation ASR A1.7
(“
Doors and gates
“)
4. SAFETY INSTRUCTIONS
DANGER !
Failure to comply with the documentation could result in
life
-
threatening danger!
Be sure to follow all the safety instructions in this docu-
ment.
DANGER !
Life
-
threatening danger due to electric shock!
•
It is vital that you disconnect the operator system
from the power supply before commencing cabling
work. Take measures to ensure that the power sup-
ply remains disconnected for the duration of the
work.
NOTICE !
For a three
-
phase current, a clockwise rotating field is
required.
WARNING !
•
Ensure that children can not play with the door con-
trols or the hand transmitter.
•
Before setting the door in motion, make sure that no
persons or objects are within the danger zone of the
door.
•
Check all the existing emergency command devices.
•
Pay attention to potential crushing and shearing
zones in the door system.
•
Never touch a running door, the guide rail or any
moving parts.
INFORMATION !
For a permanent connection, an all
-
pole main switch
must be used.
WARNING !
•
The control and the drive must be installed with its
intended covers and guards. It is important to en-
sure the correct fit of any seals and couplings are
tightened correctly.
•
The mains voltage must correspond to the voltage
stated on the type plate.
•
The mains voltage must be the same as the voltage
of the drive.
•
For a three
-
phase connection, only 3
-
way automatic
circuit breakers (10A) may be used.
•
Before switching on the controls for the first time, a
check must be carried out after completing the wir-
ing to ensure that all the motor connections at the
motor and at the controls are securely fixed.
•
SAFETY RELAYS:
•
If the control unit is a version without three safety
relays, the door manufacturer/installer is responsi-
ble of preventing any dangerous situation if one of
the contactors is welded.
