04/2022
-
Version 1 DoorTec Deutschland | www.doortec.online
11
Änderungen vorbehalten | Subject to Modifications
Parameter
Value
Wire tightening
00 =
No wire tighten function
01 =
Wire tighten 5 ms
02 =
Wire tighten 10 ms
03 =
Wire tighten 20 ms
04 =
Wire tighten 30 ms
Used to prevent that the wire is getting loose when the door is closed. Works
as a small pull back time when the door stops on close limit.
Photo settings
Photo 1: Plug in photo module mounted in X12
Photo 2: External photo mounted in screw terminals X3
00 =
No Photo safety connected
01 =
Photo 1 connected
02 =
Photo 2 connected
03 =
Photo 1 and 2 connected
Parameter 31:04 –
31:07
(only possible with electronic limits)
04 = Photo 1 connected and mounted in the door frame
(*)
05 = Photo 2 connected and mounted in the door frame
06 = Photo 1 und 2 connected and Photo 1 mounted in the door frame
(*)
07 = Photo 1 und 2 connected and Photo 2 mounted in the door frame
(*)
(*)
After selecting the right parameter value run mode is available by pressing
stop. Location of photo will now be learned by running from close to open posi-
tion. The door will stop when the photo is no longer blocked and the control
unit will change back to parameter number automatically.
Auto close
Note that impulse close must be selected in parameter 1!
00 =
No auto closing
xx =
Seconds 1 –
990
(after 99 the changing will be in x10 of seconds and
the value is flashing quickly
-
e.g. 18 is 180 seconds)
Interlock:
If stop or emergency stop is activated more than 5 sec. with door in open posi-
tion. The auto close is interlocked to prevent closing. Reset of interlock by
CLOSE push
-
button or
”
GO FUNCTION
”
close.
It is only possible to use automatic closing after selecting photo settings in pa-
rameter 31, which activates additional security provided by the light
-
sensitive
sensors. Automatic closing without additional safety by light
-
sensitive sensors:
bypass terminals 20
-
22 on terminal strip X3 and select parameter 31:02.
Car wash function
(Only available if auto close select is on)
00 =
No car wash function
xx =
Photo active time in 0.1 sec. Units (e. g. 15 = 1.5 sec.)
(Adjustable 1 –
30
units = 0.1 sec. to 3.0 sec)
Count down of auto closing time starts, only if photo has been activated more
than
”
photo active time
”.
Door shall be complete closed before start of a new
cycle.
