DSS Eurocom 612, Инструкция по установке и программированию

Страница: 5 / 80

1
1. System Overview
Introduction
Purpose
This manual provides the information needed to install, program and operate your telephone System,
it should be used in conjunction with the market-specific specification sheet supplied with this
manual.
Regulatory Information
Maintenance Limitations
Maintenance on the Telephone System is to be performed only by authorised dealers and installers.
The user is not authorised to make any changes and/or repairs except as specifically noted in this
manual. If unauthorised alterations or repairs are performed, any remaining warranty may be void.
System Components and Options
Main Equipment (2 PSTN Exchange Lines / 8 Extension Ports)
2 + 2 Expansion Card (2 PSTN Exchange lines / 2 Extension Ports) (Option)
1 + 2 Expansion Card (1 PSTN Exchange line / 2 Extension Ports) (Option)
0 + 2 Expansion Card (2 Extension Ports) (Option)
Fax / Voice Card (Option)
V24 Communications Interface Board/SMDR Port with PC Program (Option)
Up to 10 Standard And Executive Terminals (Option)
Up to 2 ISDN Cards (2 Exchange lines / 2 Extension Ports) (Option)
Door Phone Units (Option)
Meter pulse detection card (Option)
Calling line identity card (Option)
BBU - Battery Back-up Unit (Option)
25Hz ringer card (Option)
General Description
Your Telephone System is a modern stored-program controlled System designed to meet the
requirements of small office/home office applications, whether on analogue PSTN lines or on
ISDN basic rate lines. The system offers an extensive range of service features including Fax Call
Section
1