S e c t i o n 3 – S y s t e m P r o g r a m m i n g
43
It is not possible to assign an immediate hot line to extension 13 as to do so would block
any further system programming.
Default
No hotlines are set.
Immediate Hotline
Step 1
: Set the external number to dial for immediate hotline
Set Immediate Hot Line Number
System Settings
Hot line
Immediate number
Set Immediate Hot Line Number and dial out to verify
Step 2
: Enable the immediate hotline on a single extension
Switch on Immediate Hot Line and assign to an extension
General Settings
Hot line assignment
Set immediate hotline
Ext: x
Switch off immediate hot line
Delayed Hotline
Step 1
: Set the external number to dial for delayed hotline
Set Delayed Hot Line Number
System Settings
Hot line
Delayed number
Set Delayed Hot Line Number and dial out to verify
Step 2
: Enable the delayed hotline on a single extension
Switch on delayed hot line and assign to an extension
General Settings
Hot line assignment
Set immediate hotline
Ext: x
Switch off delayed hot line
Intrusion & Paging Programming
Description
It is possible for extensions to intrude on a call if an extension is busy, or to connect in handsfree
mode directly for teminal extensions. This feature must be enabled individually for each extension. It
is not possible to intrude upon data protected or fax/modem extensions.
Default
No extensions are allowed to intrude on other calls.
Enable an extension to page and intrude on extensions
System Settings
Miscellaneous
Enable Intrusion rights
Disable an extension from paging and intruding on extensions
System Settings
Miscellaneous
Disable Intrusion rights
ISDN Programming
The system supports up to 2 basic rate ISDN accesses if the optional ISDN cards are fitted. MSN
and DDI numbering is supported by the telephone system.
In the case of MSN calls an incoming call will ring at the programmed extension for 30 seconds after
which it will become a general incoming call - ringing at all extensions normally programmed to ring
on general calls. It is possible to override this default setting and program any combination of
extensions to ring on any MSN number, the procedure is detailed in ‘Ringing Settings’ on page 45.
The programmed MSN number and the incoming MSN number may have different lengths, in this
case the system looks at the shorter number and compares it with the last digits of the longer
number.
PIN
number
Key
number =
external number to dial
PIN
number
ext
PIN
number
PIN
number
ext
PIN
ext
PIN
ext
Содержание Eurocom 612
