background image

Power On Self Test: Red Green Yellow Flashing

Initialization: Alternating Green and Yellow Flashing

Ready To Fly: Consistent Green Flashing

Signal Loss: Consistent Yellow Flashing

1st Low Battery Indication: Slow Red Flashing

2nd Low Battery Indication: Rapid Red Flashing

Compass Calibration Necessary: Alternating Red and Yellow Flashing

DO NOT fly with any red lights at all.

5. 

GoPro Shooting Preferences

The GoPro has an array of different shooting modes and settings. This can be overwhelming

 

for 

users who are not accustomed to using a GoPro, so here is a quick reference guide on our 
recommendations for different shooting conditions.

Overall best shooting: 2.7k, 30 FPS,

Low light shooting: 1080P 30 FPS, Wide, No Pro tune

Slow motion: 1080p at 60 fps (any setting at a higher fps than 60) 

Put all GoPro footage through “CineForm” before putting it into any other editing program.

When shooting in the USA, it is common to shoot in NTSC and not in PAL. Use the following steps 
to change the video system on your GoPro.

Power on the GoPro by pressing and holding the power button.

Press the power button until you come to the settings menu appears on the GoPro's screen 
(Wrench). Press the record button to enter the settings menu.

Press the power button until you reach the setup menu (Two Gears). Press the record button to 
enter the setup menu.

Press the power button until you see NTSC/PAL. Press the record button to enter the menu.

Press the power button to select the desired video system. (NTSC in the USA and PAL in Europe).

Press the power button until you reach the exit option and select with the record button to leave 
the menu pages.

6.

Flight Modes

The Phantom 2 comes with multiple flight modes that allow users to control the Phantom in many 
different ways.

Attitude Mode: Maintains altitude but the craft will keep moving in one direction when influenced 
by wind or momentum.

GPS Attitude Mode: Maintains altitude and position. Even if acted upon by an outside force it will 
return to its last location (where the user let go of the sticks).

IOC Mode: No matter the position of the Phantom, the directional controls will always remain the 
same.

7.

Futaba Controller/Transmitter

The Futaba controller is the ideal controller for DSLRPros aerial kits. This is an upgraded 
controller that provides more options when piloting the Phantom2. The DSLRPros TXS-8 LiPo 
charger is meant to charge the LiPo battery for the Futaba.

 NEVER 

charge a LiPo battery with any 

Содержание Cannes HD Edition Aerial Kit













Отзывы: