DSLR Pros Cannes HD Edition Aerial Kit, Руководство пользователя

Страница: 3 / 12

PLEASE READ ALL TOPICS BEFORE POWERING ON FOR FIRST TIME
New pilots should NOT fly the Phantom with the Gimbal attached until they have had at least 10 hours of
flight practice. Refer to the Zenmuse H3-3D operator's manual for installation and removal instructions
(found on www.dji.com).
DJI Phantom 2 Wiki: http://wiki.dji.com/en/index.php/Phantom_2
DJI Phantom 2 Videos: http://www.dji.com/product/phantom-2/video
For DSLRPros videos please visit our YouTube Channel
Link:
http://www.youtube.com/channel/UCJUVqDvAzr1jbdrmhxsH7jw
1. Turning On Your Transmitter and Phantom 2
2. Advanced Calibration
3. Compass Calibration
4. LED Break Down
5. GoPro Shooting Preferences
6. Flight Modes
7. Futaba Controller/Transmitter
8. Propeller Installation
9. Gimbal Installation & Removal
10. Updating Your Software
11. Battery Safety
12.
Using The DJI Lightbridge
13.
Using The Zeiss Cinemizer OLED (If Applicable)
WARNING:
DO NOT fly with zip ties attached to Phantom. Zip ties are installed for shipping purposes only.
DO NOT use WiFi with the GoPro on the Phantom. This will cause the pilot to lose control over the craft
and result in a flyaway.
DO NOT power on the Phantom without a GoPro attached to the
gimbal. This will damage the gimbal and render it unusable.
Be sure to add the anti-drop caps to the gimbal before flying with
the gimbal attached.
It is the owner's responsibility to be certain that the propeller
blades are attached properly and securely fastened before every
flight. It is recommended that novice pilots learn to fly with the
white plastic propellers