DSLR Pros Cannes HD Edition Aerial Kit, Руководство пользователя

Страница: 11 / 12

(3)
(8)
(7)
Forward, Backward, Left and Right Control Stick.
(8)
SH Toggle Switch: This is your timer reset. The Futaba comes with dual timers set to give you an audible alarm at 4 minutes and
again at 8 minutes. Once you switch out a new battery, use the SH switch to zero out the timer. NOTE: The automatic timer should
only be used as a reference point and should not be relied upon for accurate battery life. Under ideal conditions, a Phantom 2 with
H3-3D axis installed will have 11 minutes of flight time.
(2)
SA Toggle Switch (OFF, COURSE LOCK, HOME LOCK): This is your Intelligent Orientation Control or IOC. This mode is not
enabled by default.
(3) SB and SC Toggle Switches (OFF, SMALL RADIUS, LARGE RADIUS): These switches control the advanced Point of Interest flight
profiles. This function allows the operator to bank left or right using only the right joystick. Using the SB Toggle will allow the pilot to
fly an inside pivot around a central object. Using the SC Toggle will enable you to fly an outside pivot. These functions are reserved
for advanced users and NOT enabled at default.
(1)
SE Toggle Switch (GPS, ATTI, ATTI): This is your flight mode control. The lowest ATTI position
can be set to trigger "FAILSAFE" as an advanced feature. See you DJI Phantom "Advanced NAZA
Assistant Manual" for further details.
(4)
RD Knob: This knob sets the gimbal's stopping point for the camera tilt. The tilt is controlled by the trim lever on the rear
right side of the Futaba.
(5)
SD Toggle Switch (OFF, 30%, 50%): This enables the "Fluid Slow Pan" mode.
(6) Throttle and Pan Control Stick.