DSLR Pros Cannes HD Edition Aerial Kit, Руководство пользователя

Страница: 8 / 12

10. Updating Your Software
It is recommended that you periodically check for software updates using the DJI assistant
software application. When upgrading the firmware on either the transmitter or the craft, be sure
to disconnect the gimbal from the craft. Upgrading your software with the gimbal's ribbon cable
still attached can permanently damage the gimbal.
•
Plug the Phantom into your PC or Mac using the USB cable provided.
•
Power on the transmitter with the throttle all the way down.
•
Power on the Phantom.
•
Open the DJI Phantom software.
•
Go to the “Upgrade” tab.
•
If upgrades are available, check with DSLRPros to ensure that the upgrade is necessary before
installing.
•
After the upgrade is complete, power down your craft and transmitter before reattaching the
gimbal.
11. Battery Safety
It is vital to the safety of your aerial craft, yourself, and others that you practice proper battery
safety when using, charging, and storing all batteries used with your Phantom. Improper use,
charging, and/or storage of batteries can result in damage to the battery or personal property.
Please adhere to all battery safety guidelines in the included manuals. The estimated flight time for
a Phantom 2 with H3-3D gimbal under ideal conditions is 11 minutes.
•
Only charge your batteries using the included charging units. Failure to do so may result in fire.
•
Never charge batteries unattended.
•
If you notice that a battery is swelling or ballooning,
immediately discontinue the charge, remove the
battery from the charger, and observe the battery
outside and away from any combustible materials for
at least 15 minutes.
•
In the event of a crash, remove the battery from the
craft and observe it in a safe location looking for
swelling or damage for at least 15 minutes before
using the battery again.
•
When storing your batteries for more than two
weeks, you must reduce their charge to storage mode.
Refer to your manual for proper battery storage
procedures.
•
Please adhere to the guidelines outlined in your
charging kit and only use the included Futaba
charging station when charging a Futaba battery. It is
always recommended to charge and store your LiPo
batteries in a LiPo Safe Flame Resistant bag. Failure to
do so can result in fire.