DSLR Pros Cannes HD Edition Aerial Kit, Руководство пользователя

Страница: 4 / 12

1. Turning On Your Transmitter and Phantom 2
•
Always turn on your transmitter before turning on your craft. To turn on our transmitter press the
power switch to the "on" position. Make sure your throttle is all the way down and the toggle
switches are in the uppermost position before turning on your transmitter.
•
To turn on your Phantom 2 insert the DJI Smart Flight Battery into the craft, press the circular
power button once, then press again and hold until the Power Light on the battery turns red.
2. Advanced Calibration
Make sure the settings have been properly adjusted so that the Phantom 2 can run with the best
performance possible.
•
Plug the Phantom into your PC or Mac using the USB cable provided.
•
Power on the transmitter with the throttle all the way down.
•
Power on the Phantom.
•
Open the DJI Phantom Application.
•
Go to the “Tools” tab.
•
Click “Advance.”
•
Make sure there is no metal anywhere around the compass.
•
Do not touch the table that the craft is on and make sure it is very still.
•
Click “advanced cali.”
•
When a box pops up that says “power down MC” ignore it, click OK, and do not touch anything.
•
When the advanced calibration has completed successfully, a green check mark will appear to the
right of the status bar.
3. Compass Calibration
It is important to calibrate your compass outdoors every time you fly your craft. This allows the
Phantom 2 to track its own position from multiple satellites and ensures optimal performance.
•
Set the Phantom 2 on a flat surface.
•
With the throttle down and all switches in the uppermost position power up the transmitter and
then power up the Phantom 2.
•
Wait until the Phantom 2 has full GPS lock. You will know the craft has full GPS lock when the LEDs
under the arms are green and blinking.
•
Flip the flight mode switch from “GPS” to “Atti” five times in a steady motion until the lights on the
underside of the craft turn a solid, unblinking yellow.
•
Pick up the Phantom 2 (do not hold by compass).
•
Hold the Phantom 2 straight out and turn your body in a complete circle until the lights turn from
yellow to green.
•
Stop turning.
•
Rotate the Phantom 2 vertically so that the USB port is facing straight down and repeat your 360-
degree rotation until the lights blink green again.
•
Place the Phantom 2 back on the ground and look to see that there are only green blinking lights. If
not, repeat the process.
4. LED Break Down
This list will help users understand the meaning of some of the different LED light combinations
on the Phantom 2. Please refer to your DJI Phantom 2 manual for more information.