Plug in installation
5
Installing the fixture body
DD
AA
AA
DD
1
2
A
□
□
□
□
□
□
□
Measure the distance between the two key holes on the crossbar assembly (1).
Mark the location of the two key holes on the wall with a pencil (not provided), making sure the holes line up horizontally in the
correct position.
Drill a small hole (6 mm) on each mark and nail the plastic anchors (DD) into the wall using a hammer.
Insert the two wood screws (AA) in the plastic anchors (DD) as shown.
Place the two key holes on the fixture body's (A) crossbar assembly (1) onto the two wood screws (AA). Make sure the two key
holes are secure on the two wood screws (AA) before letting go of the fixture body (A).
Adjust the shade (2) on the fixture body (A) to your desired location.
Plug the power cord (B) into the outlet, then turn on the switch and enjoy.
Wall
1
Switch
1
2
