Hardwire installation (continued)
Care and Cleaning
Troubleshooting
□
□
Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
To clean the fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or
slightly dampened, clean cloth to wipe the exterior surface of the fixture.
Discontinue use of the lamp. Check the wire connections.
Contact a qualified electrician or call the Customer Care
Service Team at 1-800-388-6141 ext 216. For customer
service support and the fastest response, please email us
at [email protected].
Problem
Possible Cause
Solution
The power is off.
Ensure the power supply is turned on.
There is a faulty switch.
Test or replace the switch.
Check the wiring.
There is a faulty wire connection.
The fuse blows, or the circuit breaker
trips, when the light is turned on.
There are crossed wires, or the power
wire is grounding out.
The LED light(s) will not light.
The LED is burned out.
Discontinue the use of the lamp.
7
3
A
A
2
1
□
□
□
5
Installing the fixture body to the outlet box
Reattach the backplate on the fixture body (A) to the crossbar assembly (1).
Secure with the previously removed mounting balls (3).
Adjust the shade (2) on the fixture body (A) to your desired location.
1
2
