DSEGenset DSEP100, Руководство оператора

Страница: 35 / 42

Front Panel Configuration
35
6.2 MAIN CONFIGURATION EDITOR
6.2.1 SETTING LOCK
A means of attaching a small padlock or utility company seal is provided that when attached, prevents
the main configuration settings being changed either from the Front Panel Editor or via Configuration
Suite PC Software.
6.2.2 ACCESSING THE MAIN CONFIGURATION EDITOR
Press the Reset and Tick buttons simultaneously. This is not possible
when the Setting Lock is active.
If a module security PIN has been set, the PIN number request is then shown :
Press , the first ‘#’ changes to ‘0’. Press the button or button to adjust it to the correct value.
Press the button when the first digit is correctly entered. The digit you have just entered will now show
‘#’ for security.
Repeat this process for the other digits of the PIN number. You can press the button if you need to
move back to adjust one of the previous digits.
When is pressed after editing the final PIN digit, the PIN is checked for validity. If the number is not
correct, you must re-enter the PIN.
If the PIN has been successfully entered (or the module PIN has not been
enabled), the editor is displayed :
NOTE :
: :
: The PIN number is not set by DSE when the module leaves the factory. If the
module has a PIN code set, this has been affected by your supplier who should be contacted if
you require the code. If the code has been ‘lost’ or ‘forgotten’, the module must be returned to
the DSE factory to have the module’s code removed. A charge will be made for this procedure.
NB - This procedure cannot be performed away from the DSE factory.
NOTE
: : : :
The editor automatically exits after 5 minutes of inactivity to ensure security.
NOTE: The PIN number is automatically reset when the editor is exited (manually or
automatically) to ensure security.
NOTE: More comprehensive module configuration is possible using the DSE
Configuration Suite PC software. Please contact us for further details.