DSEGenset DSE6010 MKII, Руководство оператора

Страница: 67 / 100

Operation
Page 67 of 100 057-230 ISSUE: 1
5.3.2
ENGINE RUNNING
NOTE: The load transfer signal remains inactive until the Oil Pressure has risen. This
prevents excessive wear on the engine.
Once the engine is running and all starting timers have expired, the animated Engine Running icon
is displayed.
In Manual Mode , the load is not transferr
ed to the generator unless a ‘loading request’ is made.
A loading request can come from a number of sources.

Press the Transfer to Generator button

Failure of mains supply (DSE6020 MKII only)

Activation of an auxiliary input that has been configured to Remote Start On Load or Auxiliary
Mains Fail ( DSE6020 MKII Only ).

Activation of the inbuilt exercise scheduler if configured for ‘on load’ runs.
Once the generator has been placed on load, it is not automatically removed. To manually remove the
load either:

Press the Open Generator (DSE6010 MKII Only) or Transfer to Mains (DSE6020 MKII
Only) button

Press the Auto Mode button to return to automatic mode. The set observes all
Auto Mode start requests and stopping timers before beginning the Auto Mode Stopping
Sequence .

Press the Stop/Reset Mode button to remove load and stop the generator.

Activation of an auxiliary input that has been configured to Generator Load Inhibit.
5.3.3
STOPPING SEQUENCE
In Manual Mode the set does not continue to run until either:

The Stop/Reset Mode button is pressed
– The delayed load outputs are de-activated
immediately and the set immediately stops.

The Auto Mode button is pressed. The set observes all Auto Mode start requests and
stopping timers before beginning the Auto Mode Stopping Sequence .