13
4.3 Keypad Assignment
Ref: Section [18], Keypad 1-8
For use with the User Help function key, this section is used to program
which audio port/intercom station has been physically placed beside sys-
tem keypad. Enter 01-15 for each keypad.
4.4 Broadcast Mask
Ref: Section [20], Port 1-8
Ref: Section [21], Port 9-15
Each port can be enabled or disabled for receiving incoming activ-
ity on the speaker. When paging to a port/station is disabled in this
section, the DND light will come ON steady.
The following sounds are masked off when disabled in this section:
•
Incoming pages
•
Sound from the monitor station
•
Doorbells
This section does not control the system alarm follower or tele-
phone rings.
4.5 Audio Options
Ref: Section [30]
[01] Local Alarm Follower (Default=OFF)
ON
Alarm tones (burg or fire) will be sounded through the
intercom stations during bell activity.
OFF Alarm tones will not be sounded.
[02] Central Station Listen to All (Default=OFF)
ON
Listen to all zones once on-line. When talk/listen-in is
initiated, the central station will hear activity from all
zones until specific zones are selected.
OFF Listen only to zones in alarm once on-line. When talk/
listen-in is initiated, the central station will hear activ-
ity from only the zones in alarm until specific zones are
selected.
[03] Page Listens to All
(Default=OFF)
ON
Enabling this feature allows all intercom ports to
respond to a page without pressing the page/answer
button to answer (excluding ports in DND or masked
off in the General Broadcast Options). When a page is
initiated, all other intercom stations can respond to a
page without pressing the page/answer button. If the
page is answered on another intercom station, general
page activity will take place. If the page is not
answered within 30 seconds, it will time out.
OFF Page Waits For Answer. A page must be answered by
pressing the Answer button to respond.