12
G E T T I N G S T A R T E D
How to Program
S
E
C
T
I
O
N
4
The following section of the manual describes the Installer’s
Programming function and how to program the various sections.
You must read the following section of the manual
very carefully before you begin programming. We
also recommend filling out the Programming
Worksheets before you program the panel.
For your reference, the corresponding programming sections for
the functions listed are highlighted in text boxes such as this one.
4.1 Installer’s Programming
Installer’s Programming is used to program all communicator
and panel options. The
Installer’s Code
is [1575] by default
but may be changed to prevent unauthorized access to
programming.
Installer Code ......................................................... Section [03]
From an LED Keypad:
Step 1
Enter [
✱
] [8] [Installer’s Code].
• The Program light will flash to indicate you are
in programming mode.
• The Armed light will turn ON to indicate that the
panel is waiting for the two digit programming
section number.
Step 2
Enter the two digit Section number corresponding
to the section you wish to program.
• The Armed light will turn OFF.
• The Ready light will turn ON to indicate that the
panel is waiting for the information required to
complete programming the selected section.
Step 3
Enter the information required to complete
section programming (ie: numbers, HEX data, or
ON/OFF options).
If the two digit Section numbered entered is invalid,
or if the module which pertains to the section is not
present, the keypad will sound a two second error
tone.
From an LCD Keypad:
Step 1
From any keypad, enter [
✱
] [8] [Installer’s
Code]. The Keypad will display ‘Enter
Section’ followed by two dashes.
Step 2
Enter the two digit number corresponding to
the programming section number you wish to
program. The keypad will now display the
information required to complete
programming the selected section.
Step 3
Enter the information required to complete
section programming (ie: numbers, HEX
data, or ON/OFF options).
If you enter information into a section and make a mistake,
press the [#] key to exit the section. Select that section again
and re-enter the information correctly.
4.2 Programming Decimal Data
A set number of programming boxes are allotted for each
section requiring decimal data (e.g.: codes, telephone
numbers). If a digit is entered for each program box, the
panel will automatically exit from the selected programming
section. The Ready light will turn OFF and the Armed light
will turn ON.
You can also press the [#] key to exit a programming section
without entering data for every box. This is handy if you only
need to change digits in the first few programming boxes.
All other digits in the programming section will remain
unchanged.
4.3 Programming HEX Data
On occasion, hexadecimal (HEX) digits may be required. To
program a HEX digit press the [
✱
] key. The panel will enter
HEX programming and Ready light will begin to flash.
The following are the numbers which should be pressed to
enter the appropriate HEX digit:
1 = A
2 = B
3 = C
4 = D
5 = E
6 = F
After the correct HEX digit is entered, the Ready light will
continue to flash. If another HEX digit is required, press the
corresponding number. If a decimal digit is required, press
the [
✱
] key again. The Ready light will turn ON and the panel
will return to regular decimal programming.
Example:
To enter ‘C1’ for a closing by user 1, you would enter
[
✱
] [3] [
✱
] , [1]
[
✱
] to enter Hexadecimal mode (Ready light flashes)
[3] to enter C
[
✱
] to return to decimal mode (Ready light is solid);
[1] to enter digit 1
If Ready light is flashing, any number you enter will
be programmed as the HEX equivalent.
If you are using a pulse format, a decimal zero [0] does not
transmit. Programming a zero [0] tells the panel not to send
any pulses for that digit. Decimal zero [0] is a filler digit. To
make a zero [0] transmit, it must be programmed as a
Hexadecimal ‘A’.
Example:
For the three digit account number ‘403’, you would enter
[4], [
✱
] [1] [
✱
] [3], [0].
[4] to enter the digit 4;
[
✱
] to enter Hexadecimal mode (Ready light flashes)
[1] to enter A
[
✱
] to return to decimal mode (Ready light is solid);
[3] to enter the digit 3;
[0] to enter the digit 0 as a filler digit.
4.4 Programming Toggle Option Sections
Some Sections contain several toggle options. The panel
will use zone lights 1 through 6 to indicate if the different
options are enabled or disabled. Press the number
corresponding to the option to turn it ON or OFF. Once all the
toggle options have been selected correctly, press the [#]
key to exit the section and save the changes. The Ready