Page | 43
Dryer Master DM510
Operations Manual
The alarms are divided into two categories, warning alarms and critical alarms. All alarm limits are
changeable by the operator. Warning alarms are provided to warn the operator that something is
exhibiting peculiar behavior and may require corrective action. Critical alarms are set to announce
that corrective action must be taken and in some cases will disable Automatic mode if no corrective
action is taken. There are also control limits set in the supervisor and installer setup menus that
may affect the setting of the alarm limits.
Alarms are announced 3 ways, the DM510 alarm beeper will sound, a message will display on the
‘Main Operations Screen’, and for some conditions the alarm light will illuminate.
To clear the alarms press any key. Both the DM510 alarm beeper and the message will clear. The
alarm light will remain illuminated until conditions return to normal. In the event the DM510 is not
on ‘Main Operations Display’ while an alarm is occurring complete the task at hand and return to the
‘Main operation Screen’ to view the alarm message and cancel the alarm by pressing
any key.
Setting & Changing Alarms Limits
Press the ‘Alarms’ key to display the ‘Alarms’ menu.
•
Press ‘1’ to select ‘Set Alarm Limits’
Or
•
Press the ‘arrow’ keys to highlight
the
selection followed by the ‘Enter’ key
Note:
It is important to set alarms and limits to inform and contain operation within
the operating parameters of the dryer and facility. The DM510 default settings
may not be safe settings for your application.
Figure 34 - Select Alarms Menu (Set Alarm Limits)
