Page | 33
Dryer Master DM510
Operations Manual
Automatic: discharge rate control at the DM510
When the DM510 is ready for Automatic Mode, the Ready Status light will illuminate. To select
Automatic Mode, press the ‘Mode’ key to display the ‘Select Control Mode’ menu.
•
Press ‘2’ to ‘Request Automatic’ mode
Or
•
Press the ‘arrow’ keys to highlight the
selection followed by the ‘Enter’ key.
•
Press ‘Cancel’ to accept the displayed
value and return to the ‘Main
Operations Screen’.
Or
•
Enter a new rate, press ‘Enter’ to accept
the new value and return to the ‘Main
Operations Screen’
Selecting Auto while the DM510 is not ready for
Auto will display the ‘Not Ready for Auto’ screen.
It is also indicated by the Ready Status light
which will not be illuminated.
The screen will display the reason why the
DM510 is not ready for automatic. Press the
‘Cancel’ key to exit and return
to
the ‘Main
Operations Screen’
Figure 13 - Select control mode menu (Automatic)
Figure 14 - Automatic mode moisture set-point entry
screen
Figure 15 - Not ready for Auto screen
