Page | 18
Dryer Master DM510
Operations Manual
DM510 Status Lights
The DM510 includes Alarm and Mode status lights located to the right and left side of the display.
These status lights provide important alarm and operation mode indication at a glance. The intent is
to supplement information already displayed on the display screen.
Description of the Status lights
1. Alarms:
a)
Inlet:
Alarm for the inlet moisture. The status light will illuminate RED when the high or
low moisture limits are exceeded or there is a fault with the sensor. A descriptive message
explaining the alarm will be displayed on the main screen along with an alarm sound. The
message and sound can be cleared with the push of the ‘CANCEL’ key but the status light will
remain illuminated until the condition is corrected.
b)
Outlet
: Alarm for the outlet moisture. The status light will illuminate RED when the high
or low moisture limits are exceeded or there is a fault with the sensor. A descriptive
message explaining the alarm will be displayed on the main screen along with an alarm
sound. The message an
d sound can be cleared with the push of the ‘CANCEL’ key but the
status light will remain illuminated until the condition is corrected.
c)
Rate
: Alarm for the dryer
’
s discharge or unload rate. The status light will illuminate RED
when the high or low rate limits are exceeded or there is a fault. A descriptive message
explaining the alarm will be displayed on the main screen along with an alarm sound. The
message and sound can be cleared with the push of the ‘CANCEL’ key but the status light will
remain illuminated until the condition is corrected.
d)
Drying
Temp
: Alarm for the drying temperature. The status light will illuminate RED when
the high or low rate limits are exceeded or there is a fault. A descriptive message explaining
the alarm will be displayed on the main screen along with an alarm sound. The message
Figure 8 - Display Screen and Status Lights
