Dru LANZA, Инструкция по установке и руководство пользователя

Страница: 13 / 44

During maintenance you should always make sure that the
electronics cannot be damaged by static electricity.
When the appliance is moved, make sure the plug is
removed from the wall socket and that the plug attached
to the appliance is
always removed from the appliance
(figure D and H) .
Your appliance should be checked annually, we recommend
that you use a qualified company for this.
Make sure the appliance is cooled down and dead before
you start cleaning or inspecting it.
Inspection and maintenance should at least guarantee a
good and safe operation of the appliance.
Ask your installer or a specialized maintenance company
to do this.
We recommend that you regularly check the appliance for
the formation of dust and make it or have it made dust
free if necessary.
In order to check the air inlet and warm air outlet for the
formation of dust, you can look at the underside of the
appliance, if necessary you can use a pocket torch
(see figure B).
Make sure the appliance is dead by removing the
plug from the appliance before you start cleaning it.
If necessary, the air inlet and air outlet can be cleaned with
a vacuum cleaner and a soft brush. Make sure the applian-
ce is dead before you start cleaning it. Do not touch the
ventilator with hard objects, this may cause imbalance.
On the inside of the front glass pane dust may accumulate
after some time.You can remove the dust with a glass
cleaner or a moist cloth (see removing the pane).
Do not use corrosive or abrasive agents when cleaning the
appliance. Damages to the paint, for example as a result of
placing objects on or against the appliance, are not
covered by the warranty.
Extra protection
If the appliance is installed in a room where small
children or infirm people are staying, we recommend
screening off the appliance and storing the remote control
in a safe place.
Thermal cut-out
A thermal cut-out is incorporated in the heating elements
in order to avoid overheating.This thermal cut-out can
switch off the heating when the hot air outlet is blocked
(see figure B) .
After the heating element has cooled down, it will not
switch on
automatically.The appliance should be
made dead for a few minutes (main switch off) in
order to reset the thermal cut-out.
If the thermal cut-out is activated with no reason, you
should contact your supplier.
Removal
The packaging materials are fit for recycling.
So do not throw them away with your house-
hold rubbish, but make sure that they can be
recycled.
When replacing or removing the appliance, you must
observe the regulations that apply. Before you can start
disassembling the appliance, you should first make it dead
by disconnecting the power cable or by switching off the
mains group to which your appliance is connected.
Old appliances contain valuable materials that
can be recycled, so please take your old appli-
ances to a suitable collection site.
Warranty
The warranty for your DRU appliance will be provided by
your supplier. In case of malfunctions, you should always
contact him.You supplier will contact DRU if he feels this is
necessary.The factory warranty for your appliance is valid
for 2 years after date of purchase.
Malfunctions
It is highly unlikely that you will be confronted with mal-
functions, but in case there are any malfunctions we
recommend you to contact your supplier.
English
INSTALLATION INSTRUCTION
figure H
Lanza
9