Droplet UHSAS Скачать руководство пользователя страница 43

Страница: 43 / 56

Manual, Ultra High Sensitivity Aerosol Spectrometer (UHSAS)

DOC-0210 Rev E-4

4 3

Choose the number of bins. This can be done either by using the

Bins

slider control or by

typing in a number in the field to the left of this slider.

Click on a

Linear

Log

bin spacing to create the bin map.

The bin map appears in the bin table. The first cell lists bin 1’s lower boundary. The

second cell lists bin 1’s upper boundary, which is also bin 2’s lower boundary. The third

cell lists bin 2’s upper boundary/bin 3’s lower boundary, and so on, until the final cell,

which lists the upper boundary of the largest bin.

Press

Commit

and wait for commit bar to complete. This process downloads the bin

map to the histogram electronics.

Pressing the

Under

button activates the undersized particle display on the histogram. When this

option is activated, the histogram will display the underflow bin beneath the smallest particle

bin. The underflow bin contains all detected particles bigger than the trigger threshold but

smaller than the lower limit of the first bin. (See section 0 for a definition of the trigger

threshold.) The

Under

button darkens when underflow display is activated.

Pressing the

Over

button activates the oversized particle display on the histogram. When this

option is activated, the histogram will display the overflow bin after the last largest particle bin.

The overflow bin contains all detected particles larger than the upper size limit of the last bin.

The

Over

button darkens when overflow display is activated.

The

Clear

button clears the bin map.

The

Load

button loads a saved file into the bin map, while the

Save

button saves the current bin

map to file. Clicking on either button brings up a window that allows the user to navigate to the

desired file. By default, bin maps are saved in the

C:\DMT\Spectrometer Support

directory as

.map

files.

Note:

The

Last Map.txt

file holds the name of the last map file to

be loaded or saved. It should not be edited by the user.

Содержание UHSAS

























































Результаты поиска

Содержание UHSAS

Отзывы:

Бренды по названию

Популярные бренды

Droplet UHSAS, Руководство оператора

Результаты поиска

Содержание UHSAS

Отзывы:

Бренды по названию

Популярные бренды