Drobo B810n, Руководство по началу работы

Страница: 29 / 34

Drobo B810n Getting Started Guide 29
This section covers the following topics:

When to shut down your Drobo B810n

Shutting down your Drobo B810n using Drobo Dashboard
2.9.1 When to shut down your Drobo B810n
It is a good idea to shut down your Drobo B810n before any of the following situations:

Your Drobo will not be used for an extended time.
 You need to disconnect a cable or power supply.

You want to move your Drobo to another location.

You need to remove the entire disk pack.

You are going to apply operating system updates.
2.9.2 Shutting down your Drobo B810n using Drobo Dashboard
This is the recommended method for safely shutting down your Drobo B810n.
1. Check that the activity light on your Drobo B810n is off, indicating that no data is actively being
transferred to or from your Drobo B810n.
Note:
If data is actively being transferred, the activity light will be blinking green.
2. Also check to ensure the drive bay action indicator lights are not blinking alternately between
yellow and green. This indicates that your Drobo B810n is busy working to protect your data.
Wait until these lights are a solid green.
Important Note:
If one or more drive bay lights are red, you need to add capacity or replace the current drive. However,
you can still safely shut down your Drobo B810n.