background image

drobo.com

 

 

|  Getting Started Guide for Your Drobo B800i    |  

4

drobo.com

 

 |  Getting Started Guide for Your Drobo B800i    |  

Cable Interfaces Supported

Your Drobo uses the following two types of ports.

Note: 

Only the USB cable interface or the iSCSI (Ethernet) cable interface can be used 

at any one time. If both are plugged in, only the USB interface will be active. 

USB 2.0

USB (Universal Serial Bus) is a popular interface that allows you to attach additional 
hardware devices to your computer in a plug-and-play style. On the Drobo B800i, this 
connection is used only for initial setup and administrative purposes, after which the 
iSCSI (Ethernet) connection is used. 

iSCSI (Ethernet)

iSCSI (Internet Small Computer System Interface) is an Internet Protocol (IP)-based 
networking standard for connecting storage devices to computers. By using a high 
performance Ethernet connection, iSCSI can be used over long distances on your 
existing network infrastructure. It’s also ideal for high volume data storage traffic and 
is designed to be a direct block-level protocol that reads and writes directly to the 
storage device.

With two iSCSI ports on the Drobo B800i, you can maximize performance. You can 
configure each port to a different network so that both networks have access to the 
Drobo B800i. You can also connect one port directly to the host computer and the other 
to a network via a router.

With iSCSI, you have the flexibility to set up your Drobo B800i in one of three 
configurations: directly connecting it to the host computer (for best performance), 
connecting it to a switch in which another Ethernet port on the switch is connected 
to the host computer, or connecting it to a switch (or router) in which another 
Ethernet port on the switch (or router) is connected to your network. For the latter two 
configurations, you will need to manually set IP addresses for the ports. You will do this 
during the setup process. See “Setting Up in Just a Few Steps!” on page 7 for more 
information.

Содержание B800i

















































Отзывы: