Drobo B800i Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 48

Drobo B800i Скачать руководство пользователя страница 13

drobo.com

| Getting Started Guide for Your Drobo B800i |

12

drobo.com

| Getting Started Guide for Your Drobo B800i |

1.

Remove the face plate from the front of your Drobo B800i by pulling it off.

2.

With one hand, hold the hard drive so that its connectors are positioned at the device

and toward the left.

Warning:

For optimal performance, keep the Drobo B800i in its normal horizontal

position. If placed on its side, hard drives may disconnect.

3.

With your other hand, use your thumb to depress and hold open one of the drive

locks to a selected data bay. Refer to the image below.

4.

Slide the hard drive into the data bay, release the drive lock and push the drive into

place until you feel it connect.

The drive lock will snap behind the drive, securing it into place.

5.

Insert additional drives in the same manner, following steps 2 through 4.

6.

When finished, replace the faceplate right side up, so that when your Drobo device is

turned on, you will be able to see the indicator lights.

You are now ready to connect cables and power on your Drobo device.

Drive Lock

Data Bay Indicator

Data Bay

Connectors

«
...
11
12
13
14
15
...
»

Содержание B800i

















































Отзывы:

Нет отзывов