drobo.com
| Safety and Warranty |
i
Safety and Warranty
Safety
This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operational precautions of
which you should be particularly aware.
Please read these instructions before operating Drobo, DroboPro, DroboElite, DroboFS, ProFS, B800i or B800fs and save them for future reference.
1. Read all instructions: All safety & operating instructions should be read and understood before operation.
2. Retain instructions: The safety and operating instructions should be retained for future reference.
3. Heed Warnings: All warnings on the appliance and in the operating instructions should be followed.
4. Follow Instructions: All operating and usage instructions should be followed.
5. Drobo, DroboPro, DroboElite, Drobo FS, Pro FS, B800i, and B800fs are to be used with UL Listed ITE Equipment only.
6. Avoid Water and Moisture: Drobo, DroboPro, DroboElite, Drobo FS, Pro FS, B800i, and B800fs should not be used near water (for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool).
7. Provide Adequate Ventilation: Drobo, DroboPro, DroboElite, Drobo FS, Pro FS, B800i, and B800fs should each be situated so that its location or position does not
interfere with its proper ventilation. For example, Drobo should not be situated against a surface that may block the ventilation openings or placed in a built-in
installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. Additionally, no other device other than a Drobo
should be placed on top of DroboShare.
8. Protect from Heat: Drobo, DroboPro, DroboElite, Drobo FS, Pro FS, B800i, and B800fs should be situated away from heat sources such as radiators, heat
registers, stoves, or other appliances (including amplifiers) that produce heat.
9. Protect Power Cords: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying
particular attention to cords and plugs, convenience receptacles, and the point at which they exit from the product.
10. Avoid Object and Liquid Entry: Never push objects of any kind into Drobo, DroboPro, DroboElite, Drobo FS, Pro FS, B800i, and B800fs ventilation slots except
drives compliant with the User Guide as they may touch dangerous voltage points or short the parts, resulting in the risk of fire or electric shock. Never spill
liquid of any kind onto Drobo.
11. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF ELECTRICAL PLUG TO WIDE SLOT AND INSERT FULLY.
12. DROBO, DROBOPRO, DROBOELITE, PRO FS, B800i, AND B800fs CONTAIN A LITHIUM BATTERY WHICH CAN EXPLODE IF MISHANDLED. BATTERY IS NOT FIELD
OR USER-SERVICEABLE. Please dispose of battery in a manner consistent with local jurisdictions.
13. DRIVES IN DROBO, DROBOPRO, DROBOELITE, DROBO FS, PRO FS, B800i, AND B800fs WILL RETAIN HEAT AFTER USE. PLEASE USE CAUTION WHEN
REMOVING DRIVES FROM DROBO, DROBOPRO, OR DROBOELITE. TO SAFELY REMOVE DRIVES, PRESS THE DRIVE LATCH TO RELEASE THE DRIVE AND
ALLOW THE DRIVE TO COOL IN THE DATA BAY FOR 10 MINUTES BEFORE COMPLETELY REMOVING THE DRIVE FROM DROBO, DROBOPRO, OR DROBOELITE.
FAILURE TO FOLLOW THIS PROCEDURE MAY RESULT IN INJURY FROM HOT DRIVES.
14. Damage Requiring Service: Drobo, DroboPro, DroboElite, Drobo FS, Pro FS, B800i, and B800fs should be serviced by an employee of Data Robotics, Inc. or a
Data Robotics, Inc. Authorized Reseller ("qualified service personnel"), and should be serviced when:
A. THE POWER SUPPLY CORD OR PLUG IS DAMAGED OR FRAYED;
B. LIQUID HAS SPILLED INTO DROBO, DROBOPRO, DROBOELITE, DROBO FS, PRO FS, B800i, OR B800fs;
C. DROBO, DROBOPRO, DROBOELITE, DROBO FS, PRO FS, B800i, OR B800fs HAS BEEN EXPOSED TO RAIN OR WATER;
D. DROBO, DROBOPRO, DROBOELITE, DROBO FS, PRO FS, B800i, OR B800fs DOES NOT OPERATE NORMALLY WHEN YOU FOLLOW THE OPERATING
INSTRUCTIONS;
E. DROBO, DROBOPRO, DROBOELITE, DROBO FS, PRO FS, B800i, OR B800fs HAS BEEN DROPPED OR THE CHASSIS DAMAGED;
F. DROBO, DROBOPRO, DROBOELITE, DROBO FS, PRO FS, B800i, OR B800fs SHARE EXHIBITS A DISTINCT CHANGE IN PERFORMANCE.
15. Use only the supplied USB 2.0,USB 3.0, FireWire 800, Ethernet, and power cables when operating Drobo, DroboPro, DroboElite, Drobo FS, ProFS, B800i, or
B800fs.
Servicing –
The user should not attempt to service Drobo, DroboPro, DroboElite, Drobo FS, Pro FS, B800i or B800fs beyond that described as user service items in
the FAQ section of this manual, the Troubleshooting sections of the Help Files, or the support Knowledge Base. All other servicing should be referred to qualified
service personnel.
Cleaning –
Unplug Drobo, DroboPro, DroboElite, Drobo FS, Pro FS, B800i, or B800fs from the wall outlet before cleaning. Do not use liquid or aerosol cleaners;
use a damp cloth. If Drobo, DroboPro, DroboElite, Drobo FS, Pro FS, B800i, or B800fs comes in contact with any liquid, unplug the power adaptor and let Drobo dry
thoroughly before plugging back in.
Power Source
–
Drobo, DroboPro, DroboElite, Drobo FS, Pro FS, B800i, or B800fs should be operated only from the type of power source indicated on the marking
label or in this User Guide. If you are not sure of the type of power supplied to your home or business, consult your local power company.
Overloaded
Power Outlets
–
Do not overload wall outlets and extension cords, this can result in risk of fire or electric shock.
Electric
Shock
–
To reduce the risk of electric shock, do not disassemble Drobo, DroboPro, DroboElite, DroboFS, ProfS, B800i or B800fs. Doing so will void the
warranty. Take it to a quailed service person when service or repair work is required. Opening or removing covers may expose you to dangerous voltage or other
risks. Incorrect reassembly can cause electric shock when Drobo is used.
Moving –
Avoid moving Drobo, DroboPro, DroboElite, DroboFS, ProfS, B800i or B800fs while it is plugged in to avoid shock and vibration damage to the installed
hard disk drives.
Electrostatic
Discharge
-
The components inside your Drobo and disk drives are sensitive to static electricity, also known as electrostatic discharge. Before you
install any disk drive, we recommend that you do the following: 1) Avoid static-
causing surfaces such as carpeted floors, plastic, and packing foam; 2) Discharge yourself by touching an unpainted metal surface such as a desk or rack mount;
3) Remove disk drives from their antistatic bags only when you are ready to use them. Be sure to follow any additional recommendations that the disk drive
manufacturers provides.
Repair
Technician
Warning!
-
Before opening the DroboPro or DroboElite unit or removing the power supply assembly, the AC cord MUST be unplugged from the
outside of the unit and the unit must be unpowered. The System Earthing connections of the internal AC cable must not be removed if the system is powered on
for service access.
Содержание B800i
Страница 1: ...Getting Started Guide Drobo Model B800i...
Страница 40: ...Safety and Warranty...
Страница 48: ...drobo com Safety and Warranty viii NOTES...