Drobo B800i, Руководство по началу работы

Страница: 36 / 48

drobo.com | Getting Started Guide for Your Drobo B800i | 35
If…
You are running the latest version of Drobo Dashboard under Windows Server 2008, but
cannot format your Drobo B800i using the iSCSI connection…
Then…
Use the following procedure to format your volume(s).
Steps
These steps use Disk Manager and do not require you to change data interfaces for the
formatting process.
1.
Use Drobo Dashboard to create, but not format, your volume(s) on the DroboElite/B800i:
t%PVCMFDMJDLPOUIF%SPCP#JPOUIF
All Devices
page.
t&OTVSFZPVBSFMPHHFEJOUPUIF#JBTBENJOJTUSBUPS
t'SPNUIF
Navigation
menu, click the
Volumes
option.
t$MJDLUIF
Add
button in the lower-left and follow the prompts to create a new
volume.
2.
Launch
Disk Manager
in Windows Server 2008.
3.
Right click the "grey square" next to the Drobo volume you just created.
4.
Select
bring online
.
5.
Use
Disk Manager
to format the volume.
After formatting completes, you should be able to use your DroboElite/B800i normally.
If…
You are having problems formatting your Drobo B800i on Windows Server 2003...
Then…
Use the following procedure to format your volume(s).
Steps
1.
Ensure that you are using a1 Gbit/s network adapter card and that the drivers for your
card are up-to-date.
2.
In Drobo Dashboard, be sure you are logged in to your Drobo B800i as the
administrator, and then:
t%PVCMFDMJDLUIF%SPCP#JPOUIF
All Devices
page.
t0OUIF
Capacity and Tools
page, select the
Reset
icon from the
Tools
drop-down list.
t*OUIF
Erase Confirmation
dialog page, enter the word
ERASE
and click the
OK
button. Note that this will erase all data on the drives.