Drivecon VF61, Руководство по эксплуатации функций

Страница: 13 / 28

12
4-1-12 Selection of special setting items
1) No. 16 Function up (selection of special setting items)
(1) Sp.set-1
Special setting item 1........................ Various functions can be set. (See 4-2)
(2) Sp.set-2
Special setting item 2....................... Motor ratings, constants, and gains (analog) can be set.
(See 4-3)
(3) Option
Optional setting................................ Analog setting on the optional board can be set. (See 4-4)
4-1-11 Start/stop mode selection
1) No. 14 Start.Mode (start mode selection)
[1] Min.F start
(minimum frequency start)..... The inverter is started with the output frequency set as
Min.F.
Note: When Min.F Start is selected for restarting the inverter after instantaneous power failure, the inverter is
restarted at the frequency just before the instantaneous power failure has occurred.
2) No. 15 Stop.Mode (stop mode selection)
[1] decel stop (deceleration stop)..... When the stop command is issued, the inverter slows down
until the output frequency becomes near 0, and then stops.
[2] free stop ................................... When teh stop command is issued, the inverter stops
immediately. (The motor runs idle.)