07-01776H F412-115V
5
Dri-Eaz Products, Inc.
USER SETTINGS
Only menu items followed by a greater-than symbol (>) may be adjusted. If no keys are selected for 5 minutes on screens: INLET
OUTLET, GRAIN DPR (INLET-OUTLET for 230V models), the display will return to normal display mode. In all the other menu items,
the display with return to the normal display mode after 20 seconds. Items without the symbol (>) are for information only and cannot be
changed or reset.
Press
DISPLAY
MENU
to proceed to
the next menu item. ↓
Press
MENU SELECTION
to change the setting.
→
1. JOB HRS RESET
>
PWR INTERRUPT X
1. JOB HR RESET 0
PWR INTERRUPT 0
Press
to reset to 0.
2. INLET OUTLET
100' 80% 115' 30%
For information only.
3. GRAIN DPR
XX GPP
( XX.X g/kg for 230V models )
4. FILTER CLEANED
XXX HRS
>
5. FILTER CLEANED
0 HRS
Press
to clear filter hours.
5. COIL CLEANED
XXX HRS
>
5. COIL CLEANED
0 HRS
Press
to clear coil hours.
6. HUMIDISTAT
MODE OFF
>
6. HUMIDISTAT
MODE ON
>
Press
to turn ON or OFF.
7. HUMIDISTAT
SETPOINT XX%
>
Press
to cycle through 40%
–90% at 5% increments (default is 50%).
8. LANGUAGE
ENGLISH
>
8. IDIOMA
ESPANOL
>
8. SPRACHE
DEUTSCH
>
8. LANGUE
FRANCAIS
>
Press
to change
language options.
9. TEMP UNITS
'F
>
9. TEMP UNITS
‘C
>
Press
to change to °F or °C.
10. COIL TEMP
XX’
For information only.
11. COMP CURRENT
XX.X A
For information only.
12. FIRMWARE
3.0X FXXX-XXX
For information only.
13. LIFE HOURS
XXXX HRS
(Returns to
top menu item.)
The following section available only on wireless-equipped units.
14. SENSOR ID
XXXXXXXX
(Returns to
top menu item.)
