-43-
8. Teletext
You are in the TV or Radio mode.
Press the Text-Button to enter the Teletext.
Keep in mind that not every station transmits Teletext!
Teletext - regular navigation:
If you are viewing any Teletext page you can enter the interactive mode by pressing the
OK-Button
.Use the
Navigation-Buttons
to select a text page number and press the
OK-Button
to call this page. You don’t need
to type in a text page number in this mode, but it is still possible.
Press the
EXIT-Button
to exit.
Press the
Mute-Button
a couple of times to toggle between transparent-mode, invisible-mode and full mode.
The alpha-mode shows the picture from the running program through the text pages. The invisible-mode
shows the complete picture from the running program without exiting the Teletext. The full-mode brings back
the text page.
Press the
Volume-up-Button
to toggle between double high from the upper half, double high from the lower
half and full view text page.
Press the
Volume-down-Button
to activate or deactivate the PIG-Mode (Picture in Graphics). Same view
from Text page and Program picture. (best results are show on 16:9 TV’s during 4:3 transmission).
Teletext configuration menu:
If the Teletext page 100 is shown you can press the
MENU-Button
to enter the Teletext configuration menu.
You have the following options:
Teletext - Selection:
Select the “Search“ option and press the
OK-Button
to start searching for Teletext information on other ser-
vices without having to leave the service that you currently are watching. After the search is finished you can
use the
Navigation-Buttons
left and right to select the Teletext of another service without having to switch
services. Press the
OK-Button
to select the desired Teletext. This option is only available if more than one
service on the current satellite transponder actually transmits Teletext information. If this is not the case you
cannot make a selection.
