47 of 95
Reference Manual ATOM one SSM500
Usually the timeout value should be kept at its’ default, if you experience problems with
your genlock signal, e.g. the camera resyncs often, you may increase the glitch filter
timeout.
Value
Reset
Minimal
Maximal
time_ms
200
0
5000
10.8 sdi_black <offset>
Sets the black level for SDI in legal range mode (see
sdi_range
).
An offset value of 0 will result in SDI black value of 64 (SMTP conform).
When changing this value the black level on the SDI interface can be set different than 64
(not SMTP conform).
This value changes the SDI range limiter and will stretch die output values to adapt to the
new range.
Value
Reset
Minimal
Maximal
offset
0
-60
+60
10.9 sdi_white <offset>
Sets the white level for SDI in legal range mode (see sdi_range).
An offset value of 0 will result in an SDI white value of 940 (SMTP conform).
When changing this value the white level on the SDI interface can be set different than 940
(not SMTP conform).
This value changes the SDI range limiter and will stretch die output values to adapt to the
new range.
Value
Reset
Minimal
Maximal
offset
0
-80
+79
10.10
sdi_range <flag>
Sets the SDI output range type.
Flag
Mode
Digital Code Range
Note
0
Legal
Y ranges from 64 + sdi_black
offset
Y ranges from 940 + sdi_white
offset
U/V range from 64 to 960
Used for broadcast and monitors
with defined black and white
levels.
1
Extende
d
Y/U/V range from 4 to 1019
Used for recoding with maximum
dynamic.
