6
5
TO CLEAN THE APPLIANCE
CAUTION:
Unplug from outlet and allow to cool for 60 minutes
before cleaning and descaling the unit. DO NOT IMMERSE IN
WATER.
The Dr. Brown’s Natural Flow
®
Deluxe Bottle Sterilizer should be cleaned at least
once a week when in regular use.
• The removable tray, tongs and measuring cup can be cleaned in hot soapy
water and rinsed completely.
• The base exterior and heating chamber and two covers can be cleaned with a
damp sponge or damp cloth.
TO CLEAN THE HEATING PLATE
Mineral deposits may form on the metal heating plate in the bottom of the heat-
ing chamber. It is important to descale this appliance every 4 weeks to ensure
that it continues to work properly.
• Unplug the device.
• Remove the tray.
• De-scale utilizing a 3.5 oz/100 mL mixture of vinegar/water:
1) Fill measuring cup to FILL LINE (3 oz/80 mL) with white vinegar.
2) Then add cold water up to the dashed line (.5 oz/20 mL) for a total of
3.5 oz/100 mL.
3) Pour directly over the heating element.
4) Turn the unit on and run a sterilization cycle.
5) Empty any remaining solution and rinse with clean water.
NOTE: DO NOT USE BLEACH, HARSH ABRASIVES OR SOLVENTS TO CLEAN
THE HEATING CHAMBER OR HEATING ELEMENTS AS THEY MAY CAUSE
PERMANENT DAMAGE AND WILL VOID THE WARRANTY.
WARRANTY
This appliance is warranted against defective material or workmanship for a
period of one year from the date of purchase. Any defective part will be repaired or
replaced at no charge if it has not been tampered with and appliance has been
used according to these printed instructions. This warranty gives you specific
legal rights as well as other rights which vary from state to state.
This warranty does not cover a defect that has been caused by negligence,
accidents or improper use of the appliance. To keep your appliance in good
condition and retain your warranty, USE ONLY AS DIRECTED.
CUSTOMER SERVICE
If you experience unsatisfactory operation or have any questions/comments,
call
Handi-Craft’s Customer Service at 1-800-778-9001 or send an email to
[email protected].
For purchases made outside the United States and Canada, please contact
your local distributor.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Importer: Handi-Craft Company
Address: 4433 Fyler Ave., St. Louis, MO 63116
Phone: 800-778-9001
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING! Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
