Draper Expert 70052, Инструкция по эксплуатации

Страница: 5 / 18

(16)
(17)
(1)
MMA electrode connection.
(2)
2 Pin TIG torch trigger/foot
pedal connection.
(3)
6 Pin foot pedal control
connection.
(4)
TIG torch connection.
(5)
Earth clamp connection.
(6)
Carry handle.
(7)
TIG torch.
(8)
Earth clamp.
(9)
MMA Electrode holder.
(10)
Foot pedal.
(11)
Control panel (see page 8 for
technical overview).
(12)
2nd Earthing point.
(13)
Gas input.
(14)
Power supply cable.
(15)
ON/OFF switch.
(16)
Brush/hammer.
(17)
Face mask.
– 5 –
4. UNPACKING AND
CHECKING
4.1 PACKAGING
Carefully remove the product from the packaging and
examine it for any sign of damage. Check contents
against the parts shown in Fig A. If any part is damaged
or missing, please contact the Draper Help Line (see
back page). Do not attempt to use the product!
The packaging material should be retained during the
warranty period, in case the product needs to be
returned for repair.
Warning!
• Some of the packaging materials may be harmful to
children. Do not leave any of these materials in
reach of children.
• If any of the packaging is to be thrown away, make
sure they are disposed of correctly, according to local
regulations.
5. TECHNICAL DESCRIPTION
5.1 PRODUCT IDENTIFICATION – FIG.A
FIG.A
Note: For details of our full range of accessories and consumables, please visit drapertools.com
TIG WELD
200A AC/DC
STANDARD
Pre-flow
Arc Start
Current
Hot Start
Peak Current Duty Ratio
Pulse
Frequency
Base Current
Spot Welding
Clear Depth
AC Frequency
Clear Width
Slope-down
Arc-ending
Current
Post-gas
ARC-ENDING
REPEAT
SPOT WELDING
PULSE
FAULT
COMPOSITE
PULSE
OUTPUT WAVE
DC
AC
MMA
TIG
A
%
S
Hz GAS
CHECK
SAVE LOAD
(1)
(11)
(7)
(6)
(9)
(14)
(15)
(12)
(13)
(2)(3)(4) (5)
(8) (10)