4
TITRE
TITRE
TITRE
HOW THE SYSTEM WORKS
HOW THE SYSTEM WORKS
Drainvac central vacuum cleaners are designed to vacuum both
solids and liquids
. The tank never has to be
emptied manually since the systems are directly connected to the building’s drainpipe through which the
wastewater is automatically evacuated.
Step 1
Unit is off.
Step 2
Start up: The dirt begins to be
vacuumed and water flows in.
The rubber hand
is closed
OPERATION SEQUENCE
33
1
2
TITRE
TITRE
TITRE
MAINTENANCE PROCEDURES
MAINTENANCE PROCEDURES
Except for removing objects that could remain at the bottom of your tank
(for lower tank models), the only maintenance required is cleaning the inside
of the unit.
To proceed, you just have to
remove the porthole glass as
illustrated, by pivoting it in an
anti-clockwise motion using
the handles.
Your Automatik system is very user friendly and
we recommend a visual inspection through the porthole
once a year or when needed
. If you wish to clean the inside of the unit, refer to the following section “Regular
Maintenance”.
Use a scouring sponge to
especially clean the protective
screen, the two electrodes
and, if needed, the tank.
A blocked protective screen could reduce the unit’s
performance and dirty electrodes could not adequately
send a signal to the unit to pass on to the wastewater
evacuation cycle.
At the same time, it is recommended to
visually inspect
the water inlet pipe and the rubber hand to
make sure that no foreign object is
obstructing the water flow.
REGULAR MAINTENANCE
Protective
Screen
Water Inlet
Electrode
VISUAL INSPECTION
