Dräger Zeus Infinity Empowered, Инструкция по эксплуатации, Страница: 23 / 32

Supplement Zeus Infinity Empowered 23
English
After reprocessing
Assembling and fitting device-specific components
Prerequisites:
– All components have been reprocessed and are
dry.
Installing the TurboVent 2 blower module
1 Fit the TurboVent 2 blower module (B) in the
breathing system mount (C).
2 Tighten the quick release screws (A) for the
ventilator by turning them 90° clockwise.
Assembling the breathing system
1 Visual inspection of the surface seal and
ceramic disks in the valves
2 Screw in the additional air valve (A).
3 Fit the housing upper part.
4 Tighten the five quick-release screws (B) by
turning them 90° clockwise. To do so, use a
6 mm hexagon socket screwdriver (included in
the scope of delivery).
09
4
A (2x)
B
C
CAUTION
Do not spray the nozzles on the breathing system
with silicone spray! Silicone spray can get into the
breathing system and cause the valves to stick.
07
4
095
A
B (5x)