45
The main menu
– » Settings « Menu
» Measurement « submenu
The
» Measurement «
submenu can be used to create various settings of parameters and limit
values for the measurement.
» Display mode «
Selection of the result display:
a) Numeric
b) Allocation of the result to concentration ranges with selected boundaries.
The following are available:
PAF = PASS, ALERT, FAIL
PF = PASS, FAIL
ZPWF = Zero, PASS, Warn, FAIL.
» Measurement unit «
Selection of the measurement unit for the net result:
%, ‰, mg/L, μg/L, g/210 L, μg/100mL, μg/%, g/L, mg/100mL, mg%, mg/mL
» Result resolution «
Selection of the measured value resolution.
» Sample mode «
» Auto-sample «
Selection of the type of sample mode:
a) » Fixed volume «
Sampling occurs when the
1)
minimum volume and minimum blowing time
1)
have been
reached
1)
Default setting: see “» Blow criteria «” on page 46
or
b) » End of breath «
Sampling occurs after the minimum volume
1)
has been reached at the end of the
breath
or
c) » Non-contact «
Sampling occurs when a reduced minimum volume
1)
has been reached. The
measurement result is loaded with a correction factor based on the device configura-
tion.
d) » Mouth alcohol det. «
Activation/deactivation of the mouth alcohol detection during the sampling with a)
and b).
» Additional «
Activation of the possibility to manually trigger the sample
» Manual «
Activate/deactivate manual sampling (see Instructions for Use,
Manual sampling).
» Passive «
Activate/deactivate
passive sampling (see Instructions for Use,
Passive sampling).
