DR 30.00 COMMERCIAL RAPID-FEED CHIPPER, Руководство по безопасности и эксплуатации

Страница: 51 / 80

CHAPTER 6
TROUBLESHOOTING
d
R
Troub
S
Y
Most problems are easy to fix. Consult the Troubleshooting Table below for common problems an
their solutions. If you continue to experience problems, contact us at www.DRpower.com or call D
Power Equipment for support.
leshooting Table
MPTOM
P
OSSIBLE
C
AUSE
T
using
(Pleas
Engine Owner’s
m u
sp f
⇒
Check the wire connections, especially the large black ground wire
econnect the battery ground
the ground connection on the solenoid where it’s bolted to the
heck the voltage yourself or at a service
harge it with a 12-volt, 1 to 2 Amp trickle charger.
n’t use your Chipper for at least 45 minutes at a time, the
need to be periodically charged. See the Battery Care
-9637) for assistance.
he engine won’t start
electric-start.
e refer to the
⇒
Is the Fuel Shut-Off Valve in the ON position?
⇒
Are the spark plug wires attached?
⇒
Have you checked all the items under the section called Starting in
Chapter 4?
an al for engine-
eci ic procedures.)
where it connects to the battery and where it connects to the engine.
⇒
Check the wire connections to the solenoid. Disconnect the black
battery ground wire first to avoid sparks. Check to be sure that all of
the connections are clean and tight. R
wire.
⇒
Check
frame. Using a wrench or socket, tighten the bolts to ensure a good
connection to the frame.
⇒
Is your battery charged? C
station. If it’s low, c
If you do
battery may
section in Chapter 5.
⇒
If your battery is charged and your DR RAPID-FEED CHIPPER still
won’t start, contact us at
www.DRpower.com or call 1(800) DR-
OWNER (376
SHU P,
S
B F G ANY MAINTENANCE PROCEDURE OR INSPECTION ON THE CHIPPER..
T DOWN THE ENGINE, WAIT FOR ALL MOVING PARTS TO COME TO A COMPLETE STO
REMOVE SPARK PLUG WIRES, DISCONNECT THE NEGATIVE BATTERY CABLE, THEN WAIT 5 MINUTE
E ORE PERFORMIN
CONTACT US AT
www.DRpower.com
or CALL TOLL FREE
1-800-DR-OWNER
47