DR 30.00 COMMERCIAL RAPID-FEED CHIPPER, Руководство по безопасности и эксплуатации

Страница: 19 / 80

•
WEAR EYE PROTECTION WHEN CUTTING THE BANDING. THE BANDING MAY HAVE A LOT OF
TENSION ON IT AND MAY SNAP AND CUT YOU. ALWAYS STAND TO ONE SIDE WHEN CUTTING
THE BAND.
•
WEAR EYE PROTECTION WHEN CUTTING THE BANDING. THE BANDING MAY HAVE A LOT OF
TENSION ON IT AND MAY SNAP AND CUT YOU. ALWAYS STAND TO ONE SIDE WHEN CUTTING
THE BAND.
•
STABILIZE THE SHIPPING CONTAINER ON CLEAN FLAT TERRAIN BEFORE ATTEMPTING TO
UNPACK AND ASSEMBLE THE CHIPPER.
•
STABILIZE THE SHIPPING CONTAINER ON CLEAN FLAT TERRAIN BEFORE ATTEMPTING TO
UNPACK AND ASSEMBLE THE CHIPPER.
•
FOR YOUR SAFETY WE RECOMMEND YOU HAVE TWO PEOPLE FOR THE FOLLOWING
•
FOR YOUR SAFETY WE RECOMMEND YOU HAVE TWO PEOPLE FOR THE FOLLOWING
PROCEDURES.
CONTACT US AT
www.DRpower.com
or CALL TOLL FREE
1-800-DR-OWNER
15
rom
Plastic
Banding
Bottom
Board
Figure 5
Pallet
Crate Top
1. Cut the Plastic Banding that is securing the Parts Box
and any Accessory Box that may be strapped to the
Crate Top (
Figure 5 ).
2. Pry off the bottom four boards that connect the Crate
top to the Pallet.
3. With help from another person, lift the Crate Top f
the Pallet. the Pallet.
rom
4. Remove the Parts Box and the Road-Tow Package (if
ordered).
4. Remove the Parts Box and the Road-Tow Package (if
ordered).
5. Carefully cut the Steel banding holding the machine
and Hopper Assembly to the pallet (
Figure 6 ).
5. Carefully cut the Steel banding holding the machine
and Hopper Assembly to the pallet (
Figure 6 ).
Steel
Banding
Plastic
Banding
Figure 6
Chipper
Assembly
Hopper
Assembly
Steel
Banding
6. Cut the Plastic Banding that is holding the Extended
Top-Discharge Chute (if ordered) to the Pallet and
remove the Extended Top-Discharge Chute. 6. Cut the Plastic Banding that is holding the Extended
Top-Discharge Chute (if ordered) to the Pallet and
remove the Extended Top-Discharge Chute.
7. With the help of another person, carefully remove the
Hopper Assembly and roll the 30.00 COMMERCIAL
DR RAPID-FEED CHIPPER from the shipping pallet,
resting it on the Tongue Assembly. 7. With the help of another person, carefully remove the
Hopper Assembly and roll the 30.00 COMMERCIAL
DR RAPID-FEED CHIPPER from the shipping pallet,
resting it on the Tongue Assembly.
8. Compare the contents of the shipping carton and the
Part Box with the Parts Supplied list on the previous
page
. If there are any questions contact us at
www.DRpower.com or call 1-800-DR-OWNER (376-
9637).
Do not discard the shipping materials until you
are fully satisfied with your new 30.00 COMMERCIAL
DR RAPID-FEED CHIPPER.
8. Compare the contents of the shipping carton and the
Part Box with the Parts Supplied list on the previous
page
. If there are any questions contact us at
www.DRpower.com or call 1-800-DR-OWNER (376-
9637).
Do not discard the shipping materials until you
are fully satisfied with your new 30.00 COMMERCIAL
DR RAPID-FEED CHIPPER.